Josip MARIC

Paris

Associate Professor in Information Systems

Academic Director of M1/M2 DESMI

Presentation

Josip Marić is an Associate Professor in Information Systems. He joined EM Normandie in 2020. He has a PhD in management science from the Université de Montpellier, awarded in 2018. His thesis is on sustainable development and digital transformation, with a specific focus on the implications of 3D printing technology. His research interests are Information Systems (IS), operations management, innovation and entrepreneurship. His research focuses mainly on digital technology, digital transformation, innovation and sustainable development. He is Academic Director of M1/M2 DESMI.

Professional experience

Since 2020: assistant professor, l'EM Normandie
2020: lecturer, IÉSEG Business School, Paris
2018-2019: lecturer, SKEMA Business School, Paris
2017-2018: research assistant, Montpellier Business School
2016-2017: visiting scholar, University of Wollongong, Australia

Department

Supply Chain & Management Digital

Subjects taught

Innovation and entrepreneurship Supply Chain Management Management of information systems

Degrees

2018 : PhD in Management Studies, Université de Montpellier

Publications

Maric, J 2018, 'Sustainability and responsibility in the digitalization era: a study of consumer-level 3DP technology', PhD in Management studies, Université de Montpellier.

2018

PhD Dissertation / Accreditation to Supervise Management Research
Marić, J, Pejić-Bach, M & Gupta, S 2024, 'The origins of Digital Service Innovation (DSI): systematic review of ontology and future research agenda', Journal of Service Management (JoSM), Vol. 35 No. 2, pp. 141-175. FNEGE : 3 ; ABS : 2.

2024

Academic articles
Marić, J & Gamma-Araujo, I 2024, 'Implications of the COVID-19 pandemic in education and vaccine hesitancy among students: a cross-sectional analysis from France', International Journal of Logistics Research and Applications, vol. 27, issue 4, pp. 557-576. CNRS : 3 ; FNEGE : 3 ; ABS : 1 ; HCERES : B.

2024

Academic articles
Opazo-Basáez, M, Vendrell-Herrero, F, Bustinza, O.F, Vaillant, Y, & Marić, J 2023, 'Is digital transformation equally attractive to all manufacturers? Contextualizing the operational and customer benefits of smart manufacturing', International Journal of Physical Distribution & Logistics Management (IJPDLM), Vol. 53 No. 4, pp. 489-511. FNEGE : 2 ; HCERES : A ; ABS : 2.

2023

Academic articles
Marić, J, Opazo-Basáez, M, Vlačić, B & Dabić, M (forthcoming), 'Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams', Technological Forecasting and Social Change, vol. 193, August. FNEGE : 2 ; ABS : 3

2023

Academic articles
Vendrell-Herrero, F, Opazo- Basáez, M & Marić, J 2023, 'Open and Social: Portraying the resilient, social and competitive, upcoming enterprise, Journal of Enterprise Information Management, vol. 36, no. 1, pp. 45-69. CNRS : 4 ; FNEGE ; 3 ; HCERES : B ; ABS : 2.

2023

Academic articles
Opazo-Basáez, M, Monroy-Osorio, J.C. & Marić, J (forthcoming), 'Evaluating the Effect of Green Technological Innovations on Organizational and Environmental Performance: A treble Innovation Approach', Technovation. FNEGE : 2 ; ABS : 3.

2023

Academic articles
Marić J, Galera-Zarco C & Opazo-Basáez, M 2022, 'The Emergent Role of Digital Technologies in the Context of Humanitarian Supply Chains: A Systematic Literature Review', Annals of Operations Research, vol. 319, pp. 1003-1044. CNRS : 2 ; FNEGE : 2 ; HCERES : A ; ABS : 3

2022

Academic articles
Opazo-Basáez, M, Vendrell-Herrero, F, Bustinza, O. F & Marić, J 2022, 'Global value chain breadth and firm productivity: the enhancing effect of Industry 4.0', Journal of Manufacturing Technology Management, vol. 33, no. 4, pp. 785-804. CNRS : 4 ; ABS : 1.

2022

Academic articles
Maric, J 2020, 'Exploring 3D printing technology in the context of product-service innovation: case study of a business venture in south of France', International Journal of Business Environment, vol. 11(3), pp. 222-238.

2020

Academic articles
Zarco, C.G, Opazo-Basaez, M, Maric, J & Garcia Feijo, M 2020, 'Digitalization and the inception of concentric strategic alliances: a case study in the retailing sector'. Strategic Change, vol. 29(2), pp. 165-177. CNRS : 4.

2020

Academic articles
Maric, J & Opazo-Basaez, M 2019, 'Green servitization for flexible and sustainable supply chain operations: A review of reverse logistics services in manufacturing'. Global Journal of Flexible Systems Management, vol. 20(1), pp. 65-80.

2019

Academic articles
Maric, J 2018, 'The gender-based digital divide in maker culture: features, challenges and possible solutions', Journal of Innovation Economics & Management, vol. 27(3), pp.147-168. CNRS 4; FNEGE 3.

2018

Academic articles
Maric, J, Rodhain, F & Barlette, Y 2016, 'Frugal innovations and 3D printing: insights from the field', Journal of Innovation Economics & Management, vol. 21(3), pp. 57-76. CNRS 4; FNEGE 3.

2016

Academic articles
Maric, J, Rodhain, F & Barlette, Y 2016, '3D printing trends and discussing societal, environmental and ethical implications', Management des Technologies Organisationnelles, vol. 6, pp. 127-138.

2016

Academic articles
Maric, J, Rodhain, F & Barlette, Y 2015, 'Responsible innovation and reverse logistics', Management des Technologies Organisationnelles, vol. 5, pp. 212-220.

2015

Academic articles
Maric, J & Ferrero, M.C.A 2024, 'The challenges of emerging technologies in the educational settings of a business school in France', 2nd Conference of Research in Entrepreneurship, Education and Technology (CREET), Cagliari, Italy, May 23-24.

2024

Academic communications
Maric, J & Ferrero, M.C.A 2024, 'The challenges of emerging technologies in the educational settings of a business school in France', AIM Conference, Montpellier, May 27-29.

2024

Academic communications
Maric, J 2024, 'The origins of digital service innovation (DSI): ontology and future research perspectives', Entrenova Conference, Dubrovnik, Croatia, September 5-7.

2024

Academic communications
Maric, J & Pejic-Bach, M 2023, 'Artificial Intelligence (AI) as a research phenomenon in digital servitization literature – expanding the relationship and highlighting future research perspectives', 10th International Conference on Business Servitization, Barcelona, Spain, November 9-10.

2023

Academic communications
Maric, J 2023, 'The challenges and benefits of 3D printing technology as a pedagogical innovation in business and management disciplines', Entrenova, Dubrovnik, Croatia, September 14-16.

2023

Academic communications
Maric, J 2022, 'Ethnography as a research approach in digital environment: insights from a research project on 3D printing technology in France', ENTerprise REsearch InNOVAtion Conference (ENTRENOVA), Opatjia, Croatia, June 17-18.

2022

Academic communications
Upadhayay, N.B, Gupta, S, Rocchetta, S, Kamble, S & Maric, J 2022, 'Automotive industry- on the road to servitization', 9th International Conference on Business Servitization (ICBS 2022), Malaga, Spain, November 17-18.

2022

Academic communications
Maric, J, Opazo-Basaez, M, Galera-Zarco, C & Gupta, S 2022, 'A contemporary analysis of digital technologies in Humanitarian Supply Chains (HSC)', 9h International EurOMA Sustainable Operations and Supply Chain Forum, Zagreb, Croatie, Mars 21-22.

2022

Academic communications
Maric, J 2022, 'Ethnography as a research approach in digital environment: insights from a research project on 3D printing technology in France', ENTerprise REsearch InNOVAtion Conference (ENTRENOVA), Opatjia, Croatia, June 17-18.

2022

Academic communications
Maric, J 2019, '3D printing technology adoption and future tendencies', 39th International Conference on Information Systems (ICIS), Munich, Gemany, December 15-18.

2019

Academic communications
Maric, J, Rodhain, F & Barlette, Y 2018, 'The importance of co-working spaces in 3D printing technology adoption and diffusion', 23ème Congrès de l’Association Information et Management (AIM 2018), Montreal, Canada, May 16-18.

2018

Academic communications
Maric, J, Rodhain F & Barlette, Y 2018, '3D printing technology adoption in the context of the collaborative working spaces', XXVII AIMS conference, Montpellier, France, June 6-8.

2018

Academic communications
Maric, J, Rodhain F & Barlette, Y 2016, 'Practical acceptability of responsible innovation', Forum Innovation VII conference, Paris, France, Juin 9-11.

2016

Academic communications
Maric, j, Rodhain, F & Barlette, Y 2016, 'Disruptiveness in the context of 3D printing technology', 21ème Congrès de l’Association Information et Management (AIM 2016), Lille, France, May 18-20.

2016

Academic communications
Maric, J, Rodhain F & Barlette, Y 2016, 'Discussions on Disruptive Potential of the 3D Printing Technology', Information and Communication Technologies in Organizations and Society (ICTO), Paris, France, March 3-4.

2016

Academic communications
Maric, J, Rodhain F & Barlette, Y 2015, 'Open and Responsible Innovations for Creating Competitive Advantage', 9th Mediterranean Conference on Information Systems (MCIS) – I.S. in a Changing Economy and Society, Samos, Greece, October 3-5.

2016

Academic communications
Maric, J, Rodhain, F & Barlette, Y 2015, 'Examining responsible innovation concept of integrated reverse logistic model', 20ème congrès international de l'AIM (AIM 2015), Rabat, Morocco, May 20-22.

2015

Academic communications
Rodhain, F, Fallery, B & Marić, J 2024, 'Negative and positive externalities of ICTs – on the pursuit of research based on the principles of trust and responsibility' in J. Paliszkiewicz, K. Chen, M. Mendel Trust in Social and Business Relations: Theory and Practice, Ed.Routledge, chapter 2.

2024

Research books
Maric, J, Rodhain, F & Barlette, Y 2014, 'Information Systems and Reverse Logistics: Examining Drivers of Implementation on Multiple Case-Study Scenario', In W. Kersten, T. Blecker & C.M. Ringle (Eds.). Next Generation Supply Chains, pp. 211-221, Berlin (Germany), epubli GmbH.

2014

Research books and book chapters